Premium Panel Known Issues

This article mainly covers some known issues. Please take note and review.

This page only lists panels with known issues. For panel initialization settings, please refer to this documentation.

A220 Panel

• MSFS Direct Capture cannot be used after an in-game restart.

• The display appears blurrier when the legacy pop-out window capture is used.

• The FCP speed window cannot switch to MACH indication.

• Some buttons (REVERSION panel, ACP channel selection keys, EXT PWR, etc.) may not respond or may need repeated presses when operated from SimFly Pad.

A320 Panel

• The RMP only accepts the VHF frequency input.

Specific to FBW A320

• OVHD buttons cannot display correctly with ANN LT Test mode.

• Cannot display the ATC Code content in real time during modification.

Specific to ToLiss

• Cannot display the ATC Code content in real time during modification.

• The button statuses for ATC MSG, AUTO LAND, and side stick priority cannot be synchronized.

Specific to FSL A321

Due to technical reasons, the following features are unavailable or limited on FSL models.

• OVHD Temp Knobs.

• OVHD Cabin Press Panel.

• GAIN & TILT Radar.

• RUD Trim.

• RMP.

• FLAPS (Can only be set by 1 step).

• SPD BRK (Can only be set by 1 step).

• ATC Code cannot be displayed in real-time when editing.

A330 Panel

• Cannot display the ATC Code content in real time during modification.

• The button statuses for ATC MSG, AUTO LAND, and side stick priority cannot be synchronized.

A380 Panel

• When you open the MFD’s popup keyboard and then interact with the MFD’s touchscreen, your MSFS game will enter a “lost focus” state. In this state, MSFS will temporarily be unable to respond to your peripheral inputs. Closing the MFD’s virtual keyboard will automatically restore normal functionality.

• If the game FPS is low (below 20), the touchscreen operated through SimFly Pad may become unresponsive to taps.

• The following components are not working:

  • [OVHD] All guard covers

  • [OVHD] Cabin Alt/VS, Ann Light Test

  • [CAP/FO] ATCMSG/AUTOLAND

  • [CAP/FO]Side Stick Priority.

Specific to iniBuilds A380

• The PFD and ND screens are streamed via a pop-out window, with slightly lower image quality and higher latency than direct capture.

A350 Panel

• ALL the screens do not support touch control through SimFly Pad except the EFB(OIS). This is because the popup windows of the inibuilds A350 currently cannot receive mouse events.

• The status of the CALL indicator on the RMP panel cannot be synchronized when it is off.

• None of the buttons can synchronize and display the Light Ann Test status.

• The "ID display" status in the EFIS cannot be sync.

B757 Panel

• The LTS TEST button on the OVHD is unavailable.

• The DSPY/FAIL/MSG/PFST Lights on the MCDU are unavailable.

• When VOR/DME is in AUTO mode, the CRS value cannot be displayed correctly.